Type EBW-V/EBN-V - Side grinding machine Mechanic control
Deciding features
The machine is for grinding log band saw blades, circular saw blades and gang saw blades.
Mechanic control.
Feed speed by 2-step motor.
If requested, variable feed speed adjustment by frequency converter (10 to 30 teeth/minute).
Greatly reduced grinding time.
The machine type EBN is available with dry-system
Further qualities
- Smoother wet ground surfaces.
- Less wear of the grinding-wheel.
- Application of CBN Grinding-wheels (Borazon).
- Option: Pneumatic blade clamping: Constant tooth position for all kinds of saw blades
- Reducing machine adjustment time demands. Powerful water cooling within fully closed protection hood.
- Elimination of linear guides slides: virtually no maintenance demands.
- Integrated grinding spindle height adjustment from the front of the machine.
Specification
- Voltage Supply: 380 V 3 Ph. N
- Load Feed Line Amperage Rating: 6 A.
- Two Grinding Motors: 380 V, 0,44 kW
- Driving motor: 0,25 kW
- Cooling pump: 0,12 kW
- Tooth shapes ground: all common shapes
- Tooth pitch: 15 to 100 mm
- Front face rake angle: 0 to 35°
- Clearance angle range: 0 to 20°
- Flank clearance angle range Face: 0 to 7°
- Flank clearance angle range Back : 0 to 7°
- Feeding speed: 12 teeth/min or 24 teeth/min
- Outside diameter et bore diameter: 100/20 mm
- Grinding spindle speed: 6000 RPM
Log band saw blades:
- Blade length: from 6000 mm
- Blade width: 50 to 350 mm
- Blade thickness: from 0,87 mm
Circular saw blades
- Blade diameter range (Standard): 180 to 800 mm
- Blade diameter range (special order): up to 1300 mm)
- Blade thickness: up to 6 mm
- Bore diameter: 22 to 210 mm
Gang saw blades:
- Toothed length: up to 1300 mm
- Blade width: 75 to 180 mm
- Blade thickness: from 0,8 mm
- Volume Sea-case approx. 220x130x190 cm
- Weight net: 670 kg
- Weight gross: 890 kg approx.
|
